As seen on
CineD
→
OSMODO Dome Protector (Replacement)
$19.99
Ships in just
-
Shipping Mid/Late January. Intro pricing available for a limited time.
✓ Replacement PC Dome Protector — Swap in a fresh dome when yours gets scratched, scuffed, or takes a hit
✓ Designed for extreme days — Perfect for snow spray, slush, boat days, dusty trails, and messy environments
✓ Keep extras on hand — Domes are made to be replaceable; having a spare means you’re never stuck mid-shoot
✓ Native OSMODO front interface — Threads onto OSMODO / OSMODO PRO like the ring light and 95 mm adapter
✓ Clear, centered dome — Helps keep your shot usable while adding a physical barrier in front of the lens
✓ Fast field swap — Thread on / thread off in seconds when conditions change or visibility drops
✓ Matched look & fit — Same style + fitment as your original dome protector
Please note: reflections may be present in certain shooting scenarios. This is intended for protection when water/environment exposure is likely. Not recommended for normal daily use. Not submersible. Designed for splash / spray / light rain protection only—do not use underwater.
OSMODO: Box-Style Housing for DJI Osmo Pocket 3
Turn the DJI Osmo Pocket 3 into a squared-up, studio-ready body. Keep it compact, add pro glass, mount everything.
OSMODO re-bodies the DJI Osmo Pocket 3 into a box-style cinema housing that’s purpose-built for accessories. The squared geometry stabilizes tabletop/handheld shots and clears space for cables, mics, battery banks, and lights, while the front removable lens natively takes 82mm filters and supports 95mm matte boxes. Dock your Pocket 3 onto the cartridge, then slide it through the internal hood and into the housing for a clean, repeatable setup that blocks backside reflections—similar in spirit to our matte-box adapters for OP3, but in an ultra-compact, squared package.
The front lens element is removable to swap to new accessories in the future OR if you want to use your OSMO without the lens.
Phone + DJI Mimo recommended: This slim build blocks the physical thumb controller and record button; rotate the OP3 screen to start/stop or control via the app.
Tip: Use Fast Follow and smooth, slower moves to avoid seeing lens edges. If they appear, re-center.
Want more openness and expandability? Check out Grip Rig 2 and the Grip Rig 2 Matte Box Adapter.
Cartridge Mount
Dock OP3 to the cartridge, then slide into the housing for fast swaps & consistent alignment.
Internal Hood
Integrated light-blocking tunnel reduces rear reflections for cleaner images.
82mm + 95mm Ready
Native M82×0.75 thread up front; clamp 95mm matte boxes
Elgato Prompter Adapter Ring
Adds a precise lip so OSMODO slides into the Elgato Prompter’s 82 mm baseplate adapter. Adapter ring available.
7× 1/4-20 with ARRI-Lock
Bottom(1), Left(2), Right(2), Top(1), Back(1). Anti-twist pin ports on every mount.
Phone-First Control
Use DJI Mimo (or rotate the screen in-rig). Physical thumb/record controls are blocked by design.
Minimal Cable Routing
Rear & bottom pass-throughs + a small internal bay under the cartridge for stowing slack.
Slim Profile
Compact PETG body. Not compatible with OP3 battery grips/adapters.
Theirs vs. Ours
| Feature | Generic OP3 Cages | OSMODO OP3 |
|---|---|---|
| Box-style geometry | ❌ | ✓ |
| Native 82mm thread | ❌ | ✓ |
| 95mm matte box support | ❌ | ✓ |
| ARRI-lock on every 1/4-20 | ❌ | ✓ |
| Cartridge + internal hood | ❌ | ✓ |
| Works with battery grips | ✓ | ❌ (by design) |
How Creators Use It
Phone-first: monitor & control with DJI Mimo. Rotate the OP3 screen for on-rig start/stop.
Squared geometry for stable tabletop setups and steady handheld shots.
Run ND/VND/CPL/diffusion on 82mm, or clamp 95mm matte boxes
Accessories shown may be sold separately. Not affiliated with DJI or RED. Trademarks belong to their owners.
This section doesn’t currently include any content. Add content to this section using the sidebar.
Pre-Built Kit
82mm + 95mm Ready
ARRI-Lock 1/4-20
Want a fully built, ready-to-go rig?
Skip the parts hunt. Our OSMODO OP3 Pre-Built Rig arrives assembled and balanced—just drop in your Pocket 3 and shoot. Box-style control, phone-first workflow, and mounts for days.
- 🧰 OSMODO housing + cartridge with internal anti-reflection hood
- 🖐️ Dual side handles (2×) with ARRI locking pin angles (45°, 90°, more)
- 🧲 NATO rail + Top handle for quick re-positions
- 🔋 NP-F plate & battery for extended use
- 🦿 Mini tripod for instant tabletop setups
- 📱 MagSafe phone mount for DJI Mimo control/monitoring
- 🔩 7× 1/4-20 with ARRI-lock on bottom/left/right/top/back
*VND filters or 95 mm matte boxes and USB C charging cable are sold separately.
Launch from $649
MSRP $699
We need 3-5 Week lead time to produce
Box-Style Power. Pocket-Sized Footprint.
Turn the DJI Osmo Pocket 3 into a squared-up, studio-ready body—keep it compact, add pro glass, mount everything.
- 🎞️ Pro-glass ready: Native 82mm thread + 95mm matte box support
- 🧩 Cartridge workflow: Slide-in mount through an internal hood for repeatable alignment & cleaner images
- 🔒 7× 1/4-20 with ARRI-lock: Bottom(1), Left(2), Right(2), Top(1), Back(1) — anti-twist pin ports on every mount
- 📱 Phone-first control: Use DJI Mimo; rotate the OP3 screen for on-rig start/stop
- 🪶 Slim & compact: PETG build; our smallest OP3 rig (battery hanlde not supported by design)
- ⚡ Creator tips: Use Fast Follow + smooth moves; re-center if you see lens edges
- 💥 Launch pricing: Early-bird from $99 (limited)