OSMODO Rig (Pre-Built) | Box-Style Housing for DJI OSMO Pocket 3
$649.00$699.00
-
Preorder today! Shipping early October 2025
✓ All-in-one, pre-built rig — Arrives assembled with dual handles, NATO rail, top handle, NPF plate & battery, mini tripod, and MagSafe phone mount
✓ OSMODO housing + cartridge — Slide-in cartridge through an internal hood for fast swaps & reduced rear reflections
✓ 82mm native front — M82×0.75 for ND/VND/CPL/diffusion/FX; 95mm matte box ready
✓ Dual side handles (2×) — ARRI-style locking pin pattern supports 45°, 90°, and more for secure, repeatable angles
✓ NATO rail + top handle — Quick positioning for low/high shots and accessory mounting
✓ NPF plate & battery included — Power external accessories and your OSMO for extended use
✓ Mini tripod — Tabletop stability and quick stand-ups on set
✓ 7× 1/4-20 with ARRI-lock — Bottom(1), Left(2), Right(2), Top(1), Back(1) with anti-twist pin ports on every mount
✓ Phone-first operation — Use DJI Mimo; you can still rotate the OP3 screen to start/stop in-rig
✓ Slim profile — Compact PETG body; not compatible with OP3 battery grips/adapters; light cable pass-throughs (rear & bottom) + small internal slack bay
VND filters and 95mm matte boxes are sold separately. Accessories shown in some photos may not be included.
Note: Some discount codes do not apply to the Pre-Built Rig bundles.
OSMODO: Box-Style Housing for DJI Osmo Pocket 3
Turn the DJI Osmo Pocket 3 into a squared-up, studio-ready body. Keep it compact, add pro glass, mount everything.
OSMODO re-bodies the DJI Osmo Pocket 3 into a box-style cinema housing that’s purpose-built for accessories. The squared geometry stabilizes tabletop/handheld shots and clears space for cables, mics, battery banks, and lights, while the front removable lens natively takes 82mm filters and supports 95mm matte boxes. Dock your Pocket 3 onto the cartridge, then slide it through the internal hood and into the housing for a clean, repeatable setup that blocks backside reflections—similar in spirit to our matte-box adapters for OP3, but in an ultra-compact, squared package.
The front lens element is removable to swap to new accessories in the future OR if you want to use your OSMO without the lens.
Phone + DJI Mimo recommended: This slim build blocks the physical thumb controller and record button; rotate the OP3 screen to start/stop or control via the app.
Tip: Use Fast Follow and smooth, slower moves to avoid seeing lens edges. If they appear, re-center.
Want more openness and expandability? Check out Grip Rig 2 and the Grip Rig 2 Matte Box Adapter.
Cartridge Mount
Dock OP3 to the cartridge, then slide into the housing for fast swaps & consistent alignment.
Internal Hood
Integrated light-blocking tunnel reduces rear reflections for cleaner images.
82mm + 95mm Ready
Native M82×0.75 thread up front; clamp 95mm matte boxes
Elgato Prompter Adapter Ring
Adds a precise lip so OSMODO slides into the Elgato Prompter’s 82 mm baseplate adapter. Adapter ring available.
7× 1/4-20 with ARRI-Lock
Bottom(1), Left(2), Right(2), Top(1), Back(1). Anti-twist pin ports on every mount.
Phone-First Control
Use DJI Mimo (or rotate the screen in-rig). Physical thumb/record controls are blocked by design.
Minimal Cable Routing
Rear & bottom pass-throughs + a small internal bay under the cartridge for stowing slack.
Slim Profile
Compact PETG body. Not compatible with OP3 battery grips/adapters.
Theirs vs. Ours
| Feature | Generic OP3 Cages | OSMODO OP3 |
|---|---|---|
| Box-style geometry | ❌ | ✓ |
| Native 82mm thread | ❌ | ✓ |
| 95mm matte box support | ❌ | ✓ |
| ARRI-lock on every 1/4-20 | ❌ | ✓ |
| Cartridge + internal hood | ❌ | ✓ |
| Works with battery grips | ✓ | ❌ (by design) |
How Creators Use It
Phone-first: monitor & control with DJI Mimo. Rotate the OP3 screen for on-rig start/stop.
Squared geometry for stable tabletop setups and steady handheld shots.
Run ND/VND/CPL/diffusion on 82mm, or clamp 95mm matte boxes
Accessories shown may be sold separately. Not affiliated with DJI or RED. Trademarks belong to their owners.
Pre-Built Kit
82mm + 95mm Ready
ARRI-Lock 1/4-20
Want a fully built, ready-to-go rig?
Skip the parts hunt. Our OSMODO OP3 Pre-Built Rig arrives assembled and balanced—just drop in your Pocket 3 and shoot. Box-style control, phone-first workflow, and mounts for days.
- 🧰 OSMODO housing + cartridge with internal anti-reflection hood
- 🖐️ Dual side handles (2×) with ARRI locking pin angles (45°, 90°, more)
- 🧲 NATO rail + Top handle for quick re-positions
- 🔋 NP-F plate & battery for extended use
- 🦿 Mini tripod for instant tabletop setups
- 📱 MagSafe phone mount for DJI Mimo control/monitoring
- 🔩 7× 1/4-20 with ARRI-lock on bottom/left/right/top/back
*VND filters or 95 mm matte boxes and USB C charging cable are sold separately.
Launch from $649
MSRP $699
We need 3-5 Week lead time to produce
Box-Style Power. Pocket-Sized Footprint.
Turn the DJI Osmo Pocket 3 into a squared-up, studio-ready body—keep it compact, add pro glass, mount everything.
- 🎞️ Pro-glass ready: Native 82mm thread + 95mm matte box support
- 🧩 Cartridge workflow: Slide-in mount through an internal hood for repeatable alignment & cleaner images
- 🔒 7× 1/4-20 with ARRI-lock: Bottom(1), Left(2), Right(2), Top(1), Back(1) — anti-twist pin ports on every mount
- 📱 Phone-first control: Use DJI Mimo; rotate the OP3 screen for on-rig start/stop
- 🪶 Slim & compact: PETG build; our smallest OP3 rig (battery hanlde not supported by design)
- ⚡ Creator tips: Use Fast Follow + smooth moves; re-center if you see lens edges
- 💥 Launch pricing: Early-bird from $99 (limited)