As seen on
CineD
→
OSMODO Baseplate Pro (15mm)
$49.00$0.00
Ships in
-
✓ Cinema ready OSMODO Baseplate PRO - Arca-style base with built in 15 mm rod support
✓ Side 15 mm rod mounts - Add 1/4-20 accessories, matte box supports, lens support, or other standard rod accessories
✓ Dual 1/4-20 mounts on bottom - Lock to tripod plates, sliders, or DJI Tripod
✓ Bottom to rear USB-C reroute - Moves the Pocket 3 bottom USB-C port to the back of the rig
✓ Works with OSMODO and OSMODO PRO - One Baseplate PRO for both housings
✓ Back Cover PRO compatible - Can bolt into the Back Cover PRO bottom accessory port for a rigid one piece feel
Right angle USB-C cables like this one on Amazon are recommended for clean routing to power.
OSMODO housings, rods, matte boxes, and other accessories shown in photos are not included.
OSMODO PRO System
Box-Style Housing for DJI Osmo Pocket 3 + Pocket 4
Turn your DJI Osmo Pocket 3 or Pocket 4 into a squared-up, accessory-ready cinema body with a cleaner handheld setup, more mounting options, and a modular front system.
Now Compatible
DJI Osmo Pocket 4 support is here.
OSMODO PRO now supports both DJI Osmo Pocket 3 and DJI Osmo Pocket 4 using camera-specific mounts. Already have an OSMODO PRO setup? Upgrade with the new OP4 camera mount instead of buying a full new kit.
OSMODO PRO re-bodies the DJI Osmo Pocket 3 or Pocket 4 into a box-style cinema housing that is purpose-built for accessories. The squared geometry gives you a more stable handheld or tabletop setup while creating room for cables, mics, battery banks, lights, monitors, and phone control.
The removable front system is built around 82mm filters and supports 95mm matte boxes. Dock your Pocket onto the camera-specific mount, slide it into the housing, and build a repeatable setup that feels more like a small cinema camera.
The PRO design keeps the rig more open and expandable than the original OSMODO, making it a better fit for creators who want more access, more mounting options, and a rig that can grow with future accessories.
Removable front element
Swap to new front accessories, run 82mm filters, clamp 95mm matte boxes, or remove the front element when you want a slimmer setup.
DJI Mimo friendly
Pair with your phone for monitoring, start/stop, and camera control. Great for rigged setups where phone control is faster.
Quick tip
Use Fast Follow and smoother camera moves when running wider front accessories. If lens edges appear, re-center the camera.
Camera-Specific Mount
Choose OP3 or OP4 compatibility. The camera mount keeps your Pocket aligned inside the housing.
Internal Hood
Integrated light-blocking tunnel helps reduce rear reflections for a cleaner image.
82mm + 95mm Ready
Native M82×0.75 thread up front with support for 95mm clamp-style matte boxes.
Elgato Prompter Adapter
Adds a precise lip so OSMODO PRO slides into the Elgato Prompter’s 82mm baseplate adapter. Adapter ring available.
ARRI-Lock 1/4-20 Mounts
Mount handles, arms, plates, monitors, lights, and more with anti-twist support across the rig.
OP4 Upgrade Ready
A new Pocket 4 camera mount is available, so existing OSMODO PRO users can upgrade without replacing the whole kit. Available here.
More Open PRO Layout
Designed for better access, more flexibility, and a cleaner rig-building experience compared to the original enclosed OSMODO body.
Cleaner Cable Routing
Rear and bottom routing areas help keep USB-C, power, and accessory cables more controlled when building out the rig.
Slim Box-Style Body
Compact body with pro mounting options. Not compatible with OP3 or OP4 battery grips while installed in the housing.
Theirs vs. Ours
| Feature | Generic Cages | OSMODO PRO |
|---|---|---|
| Box-style geometry | ❌ | ✓ |
| DJI Osmo Pocket 3 + 4 support | Varies | ✓ |
| Native 82mm thread | ❌ | ✓ |
| 95mm matte box support | ❌ | ✓ |
| ARRI-lock 1/4-20 mounting | Limited | ✓ |
| Internal hood system | ❌ | ✓ |
| Works with battery grips while installed | Sometimes | ❌ |
How Creators Use It
Phone monitoring and control with DJI Mimo for more practical rigged setups.
Squared geometry helps with stable tabletop builds and more controlled handheld shots.
Run ND, VND, CPL, diffusion, or clamp-style matte boxes using the modular front system.
Accessories shown may be sold separately. Not affiliated with DJI or RED. Trademarks belong to their owners.
Pre-Built Rig
OP3 + OP4 Compatible
Assembled In-House
NP-F Power Included
USB-C Cable Included
Want the full OSMODO PRO rig built for you?
The OSMODO PRO Pre-Built Rig is the easiest way to turn your DJI Osmo Pocket 3 or Pocket 4 into a complete box-style camera setup. Choose your camera mount, drop in your Pocket, and start shooting.
Built around OSMODO PRO
Open-top housing with better camera access and a modular accessory system.
OP3 or OP4 ready
Choose the correct camera-specific mount when ordering.
Power included
NP-F battery setup and slim USB-C cable included for extended use.
Ready to rig
Handles, phone mount, baseplate, and mounting points are already built in.
Included in the Pre-Built Rig
- OSMODO PRO housing
- OP3 or OP4 camera mount
- Back Cover PRO
- OSMODO Arca Swiss Base Plate
- PRO Top Handle
- Dual side handles
- MagDock phone mount
- NP-F battery, plate, charger + USB-C cable
*VND filters, 95mm matte boxes, iPhone, camera, and some accessories shown in photos are sold separately.
Launch from $599
MSRP $629
Ships/lead time shown on product page.
Choose Your OSMODO
Pick the OSMODO setup that fits how you shoot.
Both OSMODO Original and OSMODO PRO are compatible with DJI Osmo Pocket 3 and Pocket 4 using camera-specific mounts. Choose the original slim enclosed body, or step up to OSMODO PRO for a more open and expandable rig.
OSMODO
OP3 + OP4The original slim, enclosed OSMODO body. Best for creators who want the smallest box-style setup with the cartridge workflow.
Best for
- Smallest enclosed OSMODO body with a pocket-sized footprint
- DJI Osmo Pocket 3 and Pocket 4 compatibility with camera-specific mounts
- Native 82mm filters and 95mm matte box support
- Cartridge mount with internal hood for repeatable alignment
- 7× 1/4-20 mounts with ARRI-lock anti-twist support
Control note: OSMODO Original has screen access only. For full camera control, use your phone with DJI Mimo.
OSMODO PRO
OP3 + OP4The more open and expandable OSMODO setup. Best for creators who want easier access, more rigging options, and camera-specific OP3 or OP4 mounts.
Best for
- DJI Osmo Pocket 3 and Pocket 4 compatibility
- More open design for easier camera access and a cleaner rigging workflow
- Built for handles, phone mounts, batteries, cables, lights, and future accessories
- Upgrade to OP4 with a camera mount instead of replacing the whole kit
Control note: OSMODO PRO has full screen and control access and is more user friendly vs the orginial OSMODO.
Want to build your own setup?
Learn more about the OSMODO system or use the custom builder to choose the rig, mounts, and accessories that fit your workflow.